14STANDArDS FOr DrIVe cONVerTerS/cONTrOL cAbINeTSEN 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurementtechniques - Electrical fast transient/burst immunity test (IEC 61000-4-4);German version EN 61000-4-4EN 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurementtechniques - Surge immunity test (IEC 61000-4-5); German version EN 61000-4-5EN 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurementtechniques - Immunity to conducted disturbances, induced by radio-frequencyfields (IEC 61000-4-6); German version EN 61000-4-6EN 61000-4-34 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurementtechniques - Voltage dips, short interruptions and voltage variations immunitytests for equipment with mains current more than 16 A per phase (IEC 61000-4-34); German version EN 61000-4-34EN 61508-1...7 Functional safety of electrical/electronic/programmable electronic safety-relatedsystems – Part 1...7 (VDE 0803-1…7, IEC 61508-1…7)EN 62061 Safety of machinery - functional safety of electrical, electronic and program-mable electronic safety-related systems (VDE 0113-50, IEC 62061)EN ISO 13849-1 Safety of machinery - safety-related parts of control systems - Part 1: Generalprinciples for design (ISO 13849-1); German version EN ISO 13849-1Standards that are used in the environment of the drive converterDGUV regulation 3 Electrical installations and equipmentDIN 46228-1 Wire-end ferrules; Tube without plastic sleeveDIN 46228-4 Wire-end ferrules; Tube with plastic sleeveDIN IEC 60364-5-54 Low-voltage electrical installations - Part 5-54: Selection and erection ofelectrical equipment - Earthing arrangements, protective conductors and protec-tive bonding conductors (IEC 64/1610/CD)DIN VDE 0100-729 Low-voltage electrical installations - Part 7-729: Requirements for specialinstallations or locations - Operating or maintenance gangways (IEC 60364-7-729:2007, modified); German implementation HD 60364-7-729:2009DNVGL-CG-0339 Environmental test specification for electrical, electronic and programmableequipment and systemsEN 1037 Safety of machinery - Prevention of unexpected start-up; German version EN 1037EN 12502-1...5 Protection of metallic materials against corrosion - Part 1...5EN 60204-1 Safety of machinery - electrical equipment of machines Part 1: General require-ments (VDE 0113-1, IEC 44/709/CDV)EN 60439-1 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested andpartially type-tested assemblies (IEC 60439-1); German version EN 60439-1EN 60947-7-1 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment -Terminal blocks for copper conductors (IEC 60947-7-1:2009); German versionEN 60947-7-1:2009EN 60947-8 Low-voltage switchgear and controlgear - Part 8: Control units for built-inthermal protection (PTC) for rotating electrical machines (IEC 60947-8:2003 +A1:2006 + A2:2011)EN 61373 Railway applications - Rolling stock equipment - Shock and vibration tests (IEC61373); German version EN 61373EN 61439-1 Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC121B/40/CDV); German version FprEN 61439-1VGB R 455 P Water treatment and use of materials in cooling systems