3ONONTURN OFF ALL SWITCHESBEFORE PLUGGING IN MACHINEBRUSHBREAKERBRUSHBREAKERSPRAY/BRUSHSPRAY/BRUSHOFFOFFPULLTRIGGERNOTE: Hand ToolSwitch Must BeOFF During CarpetCleaning.NOTE: Removedebris frombrush. ResetBreaker.HAND TOOLHAND TOOLSUCTIONSUCTION1) Dirty water passes through theright Sight Tube while cleaning.When dirty water stops passingthrough the Sight Tube whilecleaning, the machine is empty.Empty dirty water and rinseBucket. Refill the machine.2) If foam or liquid appearsin the left Sight Tube, emptythe dirty water from the Bucketwithout refilling the machine.3) When finished cleaning, emptyand rinse Bucket. Use the clearDrain Tube at the back of the unitto empty unused solution fromthe Solution Tank.Note: Use the Hand Tool forcleaning stairs. See CleaningUpholstery for Hand Tool use.1)Tilt the machine back and move intothe starting position.2) Turn ON the Suction Switch.Note: Hand Tool Switch must be OFF.3) Pull the Spray/Brush Triggerand pull the machine backwardsat a slow steady pace, about1 foot per 2 seconds. Clean inapproximately 5 foot strokes.Overlap strokes by 2 inches,releasing the Trigger 6 inchesbefore ending each stroke.Keep the Suction Nozzle infirm contact with the carpet.Note: For best results, cleanheavily soiled areas twice atright angles.1) Plug in machine to agrounded outlet. SeeGrounding Instructions.ONONTURN OFF ALL SWITCHESBEFORE PLUGGING IN MACHINEBRUSHBREAKERBRUSHBREAKERSPRAY/BRUSHSPRAY/BRUSHOFFOFFPULLTRIGGERNOTE: Hand ToolSwitch Must BeOFF During CarpetCleaning.NOTE: Removedebris frombrush. ResetBreaker.SUCTIONSUCTIONHAND TOOLHAND TOOL1) Turn all switches OFF.Cleaning Carpet1) Return Bucket to Machine.2) Close Lid.3) Snap Bucket Handle into place.1) Important: Pour contents ofBucket into machine Solution Tank.1) Read and follow all 7 IN 1 Carpet Caredirections. Mix 7 IN 1 with water in Bucketaccording to Quick Dry directions.Note: Do not fill Bucket above top fill line.Warning: Do not use bleachor dye in this machine.User will be liable forall damages.1) Pull “T” Handle on machine Handle.2) Raise machine Handle todesired height.1) Pull down Bucket Handle.2) Lift the Lid.3) Remove the Bucket.Preparing MachinePreparing Carpet & UpholsteryCLEANING INSTRUCTIONS1) Vacuum carpet or upholstery with your vacuum cleaner. This machine is not a vacuum cleaner.NOTE: We recommend vacuuming carpet thoroughly, making four passes with a CRI approved vacuum cleaner.2) Pre-treat general spots with 7 IN 1 Carpet Care. Pre-treat pet & acid based spots with 7 IN 1 Spot & Odor Pet Formula.Pre-treat heavily soiled areas of carpet, hallways, doorways and around furniture with 7 IN 1 Hi-Traffic Pre-Treatment.Note: Read and follow all 7 IN 1 label directions prior to use. Also see Test Colorfastness.