KENT Razor 20 Service Manual

Also see for Razor 20: Brochure Specifications Specifications

Contents

ELECTRICAL SYSTEMENGLISH SERVICE MANUAL42 9097065000(2)2009-06 Razor™ 20 / 20TTROUBLESHOOTINGSee the previous chapters related to the use of the electrical system.Other possible causes:The batteries are discharged or the connections are not eficient (charge the batteries or clean the connections).1.The batteries are broken (check the battery no-load voltage).Assembly2.NOTEA fault in the battery charger and relevant connections can affect the machine operation.The battery charger is broken (replace).3.There is an open in the fuses (replace).4.The harness is cut, pressed or short-circuited (repair).5.Error codes indicated by LEDs (81a - 81b - 81c):6.Flashes Meaning ActionGreen, yellow and red LEDlashing simultaneously. Problem related to brush motor overload.Perform checks shown in BRUSH MOTORELECTRICAL INPUT CHECK.If check results are negative, check the F1fuse for integrity and its nut tightness.Red LED lashing. The batteries are discharged.Charge the batteries.If the problem persists, replace them.