KERN 1500-2M Operating Instruction
              | |
EW-BA-defsi-062028Baud rate 7. b.L. 1*.231200 Baud2400 Baud4800 BaudUnit commutation 8. Set. 1*234gg/ctnot documentednot documentedNot documented 0. GLP 1 Always use this settingNot documented A. PrF. 3 Always use this setting11 Important informationThese electronic balances are precision instruments. It is designed for use in aself-controlled electromagnetic environment. That means that in such anenvironment radio equipment, such as mobile phones, must not be used in directvicinity. In case strong electromagnetic fields should arise, deviations of theindication are possible. Avoid disturbing environmental conditions such as currentsand vibrations as well as a rapid change of the ambient temperature. If necessaryreadjust the balance after a change of temperature.Avoid high humidity, vapours and dust as the balance is not hermetically closed.Do not let the balance come into direct contact with liquids as these could enterthe measuring cell. Therefore only clean the balance with a dry or damp cloth. Donot use solvents as varnished or plastic parts could be damaged.A warming up time of a few minutes after switching the balance on will stabilise themeasuring values. Place the object carefully on the weighing pan. Avoid anyconstant load on the weighing pan even when out of use. Avoid shocks, thrustsand extreme impairments by all means. Remove spillages immediately.When the programme cycle is disturbed switch the balance off and then on again.Start the weighing operation again.Never use the balance in rooms where there is a danger of explosion. The serialversion is not explosion-proof.Opening of the balance causes invalidity of warranty.Check the balance daily with the supplied check weight.If necessary adjust the balance.The warranty is nullified if the balance is opened. |
Related manuals for KERN 1500-2M
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine