KERN 572 KB Operating Instructions Manual

Contents

KERN 572 KB Operating Instructions Manual Manual pdf 7 page image

572/573/KB/DS-BA-defsi-04410303 Fundamental information (general)It is essential to read through and observe the complete operating instructions before installing and commis-sioning.3.1 Intended useThe balance you have acquired serves to determine the weighing value of the material to be weighed. It isintended to be used as a “non-automatic“ balance, i.e. the material to be weighed is manually and carefullyplaced in the centre of the weighing plate. The weighing value can be read off after a stable weighing valuehas been obtained.3.2 Inappropriate useDo not use the balance for dynamic weighing. In the event that small quantities are removed or added to thematerial to be weighed, incorrect weighing results can be displayed due to the “stability compensation“ in thebalance. (Example: Slowly draining fluids from a container on the balance.)Do not leave a permanent load on the weighing plate. This can damage the measuring equipment.Be sure to avoid impact shock and overloading the balance in excess of the prescribed maximum load rating(max.), minus any possible tare weight that is already present. This could cause damage to the balance.Never operate the balance in hazardous locations. The series design is not explosion-proof.Structural alterations may not be made to the balance. This can lead to incorrect weighing results, faultsconcerning safety regulations as well as to destruction of the balance.The balance may only be used in compliance with the described guidelines. Varying areas of applica-tion/planned use must be approved by KERN in writing.3.3 GuaranteeThe guarantee is not valid following- non-observation of our guidelines in the operating instructions- use outside the described applications- alteration to or opening of the device- mechanical damage and damage caused by media, liquids- natural wear and tear- inappropriate erection or electric installation- overloading of the measuring equipment3.4 Monitoring the test substancesThe metrology features of the balance and any possible available adjusting weight must be checked at regu-lar intervals within the scope of quality assurance. For this purpose, the answerable user must define a suit-able interval as well as the nature and scope of this check. Information is available on KERN’s home page(www.kern-sohn.com) with regard to the monitoring of balance test substances and the test weights requiredfor this. Test weights and balances can be adjusted quickly and at a reasonable price in KERN’s accreditedDKD calibration laboratory (return to national normal).4 Fundamental safety information4.1 Observe the information in the operating instructionsPlease read the operating instructions carefully before erecting and commissioning, even if you already haveexperience with KERN balances.4.2 Staff trainingThe device may only be operated and looked after by trained members of staff.5 Transport and storage5.1 Acceptance checkPlease check the packaging immediately upon delivery and the device during unpacking for any visible signsof external damage.In the case of visible damages please obtain a signature from the bearer to serve as confirmation of dam-age. Do not make alterations to the goods and packaging, do not remove any consignment parts. Reportthe damage to the parcel service immediately in writing ( within 24 hours).