ALJ/ALS/PLJ/PLS-BA-e-1135 318 Basic OperationStart-up In stand-by mode (see chap. 6.5) press ON/OFF button.The balance is ready for weighing when the weight displayappears.Switching Off Press ON/OFF button, the balance returns to the stand-bymode (see chap. 6.5).Simple weighing Place goods to be weighed on balance Wait until the stability display appears [] Read weighing result.Taring Place the weighing box and press the TARE button.„0-t“ is displayed. After standstill control the zero display appears.The weight of the container is now internally saved. Weigh the material, the net weight will be indicated.The weight of the weighing container will be displayed as aminus number after removing the weighing container.The tare weight is saved until it is deleted. Remove the loadfrom the balance and press the TARE button. „0-t“ isdisplayed, wait until the zero display appears.The tare procedure can be repeated as many times asnecessary, for example with initial weighing of severalcomponents for a mix (add-on weighing). The limit isreached when the total weighing range capacity is full..
