TCKE-A/-B-BA-e-2333 364. Start tolerance check: Determine the average item weight, see chap. 9.2.1 Place the weighed material and check by means of the tolerance marks / acousticsignal if the weighed material is within the defined tolerance.Load below specifiedtoleranceLoad within specifiedtoleranceLoad exceeds specifiedtoleranceThe entered values will remain valid until new values are entered.To delete the values, select menu setting < check >  < limits > < clear > and confirm on ➔ button.

KERN CKE 6K0.02 Operating Instructions Manual

MODE – MENU

Technical Data

KERN CDS

Basic Information (General)

Basic Safety Precautions

Unpacking, Setup and Commissioning

Battery operation CKE

Adjustment

Operation

Display background illumination

Data output RS 232 C

Interface RS 232C

Printer

Service, maintenance, disposal

Declaration of conformity

CKE 16k0.05

MODE – MENÜ

Volume assessment - KERN QKE only

CKE-BA-e

CKE 16k0.1

CKE 6k0.02

CKE 8k0.05

TCKE 16K-4-B

TCKE 16K-5-B

TCKE 6K-5-B

TCKE 8K-5-B