KERN EC Series Operating Instructions Manual

Contents

KERN EC Series Operating Instructions Manual Manual pdf 10 page image

26 EC-BA-defs-011312 Parameter List of Functions* To change parameters (conditions), see page 23.1 . A . 0 1 : Auto zero adjustment is effective. Auto-Zero0 : No zero adjustment.2 . A . P . 0 : Automatic power off in use of battery (option) - not effective. Auto-Power1 : Automatic power off in use of battery (option) - effective. OFF3 . r E . 1 : Stabilisation time2 : Quick Wide Vibration3 : ↑ ↑ Filter4 : ↓ ↓5 : Slow Narrow4 . I F. 0 : No interfacing1 : Constant serial output (6-digit) effective with output option. Data output2 : Constant serial output (7-digit) effective with output option.41 . o . c. 0 : No output1 : Constant serial output2 : Constant serial output of stabilised data *** Output3 : - Nil - condition4 : Automatic output with a load after stabilisation *** at the port5 : One output when stabilised (no output with unstable data) ***6 : One output when stabilised (random output with unstable data) ***7 : - Nil -42 . b . L. 1 : 1200 bps2 : 2400 bps Baud Rate3 : 4800 bps43 . P A . 0 : No parity bit1 : Odd parity check Parity2 : Even parity check5 . un . 1 : Weighing unit in "g"2 : Weighing unit in "kg"3 : Weighing unit in "ct" **4 : Weighing unit in "oz" **5 : Weighing unit in "lb"** Other weight units than "g", "kg" and "lb" are indicated by mark. It isrecommended to stick a label of the unit at the mark.*** Setting at these, output of unit weight is impossible.