KERN EFB Operating Instructions Manual

Contents

KERN EFB Operating Instructions Manual Manual pdf 7 page image

EFB-BA-e-0411 76 Unpacking, installation and commissioning6.1 Place of installation, place of useThe balance is constructed in such a way that reliable weighing results can beachieved under normal application conditions.By selecting the correct location for your balance, you will be able to work quickly andprecisely.Therefore please observe the following at the place of installation:• Place the balance on a firm, level surface;• Avoid extreme heat as well as temperature fluctuation caused by installingnext to a radiator or in the direct sunlight;• Protect the balance against direct draughts due to open windows and doors;• Avoid jarring during weighing;• Protect the balance against high humidity, vapours and dust;• Do not expose the device to extreme dampness for longer periods of time. In-admissible bedewing (condensation of air moisture on the device) can occur ifa cold device is taken into a significantly warmer environment. In this case,please acclimatise the device for approx. 2 hours at room temperature after ithas been disconnected from the mains.• Avoid static charging of the material to be weighed and weighing container .Major display deviations (incorrect weighing results) are possible if electromagneticfields occur as well as due to static charging, currents and instable power supply. It isthen necessary to change the location.6.2 UnpackingCarefully remove the balance from its packaging, remove the plastic wrapping andposition the balance in its intended working location.6.2.1 InstallationInstall the balance in such a fashion that the weighing plate is absolutely horizonta6.2.2 List of items suppliedStandard accessories:KERN EFB• Balance• Stainless steel weighing plate• Operating manual