18 EMS-BA-e-1716Weighing unitsswitch-over Press the UNIT key in the weighing mode to switch-overbetween the available weighing unitsPlus/minusweighingsFor example unit weight control, fabrication control etc. Put the nominal weight on the weighing plate and tare usingthe TARE button. Remove the nominal weight Put the test objects subsequently on the weighing plate, therespective deviation from the nominal weight is displayedwith the respective sign to „+“ and „-“.According to the same procedure also packages with thesame weight can be produced, referring to a nominalweight. Back to weighing mode by pressing the TARE button.

KERN EMS 300-3 Instruction Manual

EMS 12K0.1