KERN EOB_F Instruction Manual
                           | |
Contents
|
EOB_F-BA-e-131022Setting channels(display unit)+(platform)The balance has the possibility to set different channels. Thisis particularly necessary if several platforms are inserted nextto each other. In this case failures may appear if not differentchannels have been set. It is possible to select between 3channels.Setting channels on the display unit:Set rocker switch next to the platform to „1“.Switch-on display unit using ON/OFF button and wait for zerodisplay. The data receiving symbol flashesThe triangle displays the selected channel.If the data receiving symbol does not appear, use the CH1-3button to change to the correct channelSetting the channels on the platform:Switch-off platform (rocker switch on the side to „0“)Actuate the dip switch at the lower side of the platform. (pin 4is not used).Platform 314,5 x 304, 5 mm:Platform 550 x 550 mm: |
Related manuals for KERN EOB_F
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine