KERN FFN-N Operating Instructions Manual

Also see for FFN 15K2IPN: Operating instructions

FFN-N-BA-e-1323 126 Unpacking, Setup and Commissioning6.1 Installation Site, Location of UseThe balances are designed in a way that reliable weighing results are achieved incommon conditions of use.You will work accurately and fast, if you select the right location for your balance.Therefore, observe the following for the installation site: Place scales on a stable, even surface; Avoid extreme heat as well as temperature fluctuation caused by installingnext to a radiator or in the direct sunlight; Protect the balance against direct draughts due to open windows anddoors; Avoid jarring during weighing; Protect the balance against high humidity, vapors and dust; Do not expose the device to extreme dampness for longer periods of time.Non-permitted condensation (condensation of air humidity on theappliance) may occur if a cold appliance is taken to a considerably warmerenvironment. In this case, acclimatize the disconnected appliance for ca. 2hours at room temperature. Avoid static charge of goods to be weighed or weighing container.Major display deviations (incorrect weighing results) may be experienced shouldelectromagnetic fields (e.g. due to mobile phones or radio equipment), staticelectricity accumulations or instable power supply occur. Change location or removesource of interference.