KERN FIS 30K10 IPM Operating Instructions Manual

Also see for FIS 120K20 IP: Operating instruction

Contents

KERN FIS 30K10 IPM Operating Instructions Manual Manual pdf 50 page image

FIS-BA-def-0411 10713.1.3 Calibration of the balance using test weightsExercise particular care when carrying out the calibration procedure.The GEO values are overwritten following calibration using test weights.These may then no longer be used.ONOFF2swhen“test“appearsSelection of the serviceparameter menu.PASSSelection of balanceparameters.Hidden entry of service pass-word.Programme start iscarried out if a pass word isnot entered.00 - - -Pass code is 0001. Thepositions are selected using0 .The figures are entered usingF Dotted segments flashingAdopt and check servicemenu.Balance completely installedwith load plate/pre-load andstabilized0 % max.F Zero calibration,Zero calibration until the countof the counter no longerchanges.F Apply max. load to thebalance100 % max.Range calibration,Calibration of range until thecount of the counter nolonger changes.Use F toclose/confirm