KERN FTB Operating Instructions Manual

Also see for FTB: Service manual Operating instructions

Contents

KERN FTB Operating Instructions Manual Manual pdf 18 page image

18íååååìî____ïããããããòãnoãôî_no_ïErr 6Err 534 Other important informationThis section gives information on error messages and instructions for cleaning your scale. It also includesthe declaration of conformity and technical data.4.1 Error messagesOverloadReduce the load on the scale or the preload.UnderloadPlace weighing pan on the scale and ensure that it can move freely.Weight reading does not stabilize.1.Ensure a tranquil environment.2.Ensure that the weighing pan is free to move.3. Change the setting of the vibration adapter (Section 3.4).4. If necessary use the dynamic weighing function (Section 3.4).Not possible to zero scaleEnsure that zeroing is only carried out in the permissible range andnot under overload or underload conditions.No calibration/adjustmentDisconnect the power cord plug and then plug it in again. (If operatingon the battery, switch the scale off and then on again.) If the errormessage reappears, calibrate/adjust the scale (Section 3.3). If thisdoes not help, contact your dealer or local representative.EAROM checksum errorDisconnect the power cord plug and then plug it in again. (If operatingon the battery, switch the scale off and then on again.) If the errormessage reappears, contact your dealer or local representative.