KERN GAB-P Operating Manual

7.10 Automatic adding-upThis function is used to add the individual weighing values automatically into thesummation memory and to provide a printout via the installed printer.To set this function, see chap. 8.2 „AU on“ Place material to be weighed AAfter stabilisation display has taken place, you will hear anaudio sound.The symbol for „AUTO“ appears.The weighing value will be saved to the summation memory.(example) Remove material to be weighed A„ACC 1“followed by the weight value will be displayed shortlyand printed.Afterwards the weighing scales change to zero display. Place material to be weighed BAfter stabilisation display has taken place, you will hear anaudio sound. The weighing value will be saved to the summation memory. Remove material to be weighed B„ACC 2“followed by the total weight of both weighings will bedisplayed shortly.The weight of the items to be weighed B will be printed.After that the balance changes to the zero display. Add more material to be weighed as described before.Please note that the balance must be unloaded betweenthe individual weighing procedures. You can repeat this process until the capacity of the scalesis exhausted.30 GAB-P-BA-e-1411