KERN HCD 60K-2 User Manual

27 HCD-BA-e-22146. Menu When the scale is on, press and hold the HOLD button. Do not release the HOLD button. Press and hold the ON/OFF button as well. Press and hold the ON/OFF button, but release the HOLD one. Press HOLD again. Keep both buttons pressed until “tr” is displayed. Release both buttons. The scale is in the menu mode. The ON/OFF button enables to choose one of the below-mentioned functions:Function Availablesettings DescriptiontrZeroingon Automatic zero point adjustmentoffAFAutomaticswitch-offfunctionoff 5 Automatic scale switch-off after thepreset delay; you may choose from 5,10, 20 and 30 minutes.off 10off 20off 30bLDisplaybacklighton Backlight onoff Backlight offCh Automatic switch-off of the backlight 10s after the stable weighing value isachieved.rSt YES Resetting to factory settingsNO Confirm the function selection, pressing the HOLD button. The current setting, i.e. “ON” or “OFF” or “YES” or “NO” will be displayed. TheON/OFF button enables to choose between “ON” and “OFF” or “YES” and“NO”. Confirm your selection, pressing the HOLD button. After a while, the scalewill be switched back to the weighing mode automatically.