KERN HFT 3T0.5 Operating Manual

HFT-BA-e-1812 215.2 Loading the crane scalesFor good weighing results observe the following, illustrations see next page: Only use load attachment devices which guarantee a one-spot suspension andwhere the scales can be suspended freely. Do not use too large load attachment devices which do not guarantee any one-spot suspension. Do not use multiple suspensions. Do not pull or push the load or the loaded balance. Do not pull the hook horizontally.Loading the balance1. Position the hook of the crane scales over the load.2. Move downwards the crane scales until the load can be suspended on the hookof the balance. Reduce the speed when the respective height is going to bereached.3. Suspend the load on the hook. Ensure that the safety bracket is closed. If the loadis fixed by slings, ensure that the slings rest completely on the saddle of thebalance hook.4. Lift-off the load slowly.When the load is fixed by slings, ensure that the load is well balanced on bothsides and that the slings are correctly positioned