KERN MBB-M series Service Manual

Also see for KERN MBB-M series: Operating instructions

Contents

MBB-M-SH-e-1010127 Service ModeThe balance must be switched over to the service mode. To achieve this, set thecalibration switch to calibration position (See chpt. 6.1).In the service mode all parameters of the balance can be modified.7.1 Navigation in the menu When the scale is switched on, press and hold the [→0←]-key for approx. 3seconds until “SETUP“, followed by ”UNIT“ appears. Press the [ TARE ]-key repeatedly until the desired function appears. Confirm the selected function by pressing the [HOLD]-key. The first parameterappears. To select the desired parameter, use the [HOLD]-key and confirm bypressing the [TARE]-key.To exit the menu and to store, press the [ TARE ]-key repeatedly until “END“ ap-pears, then confirm by pressing the [HOLD]-key. The balance returns automaticallyinto weighing mode.A selection is made by pressing the [HOLD]-key and the [ TARE]-key************ default setting