KERN MBE 20K10 Operating Instructions Manual

Also see for MBE 20K10: Operating instructions

Contents

9 Error messagesEE: No possibility of displaying the weighing value. It occurs e.g. when aweight is removed after finishing the automatic taring.Remove a weight, switch off the scale and switch it on again.10 Service, maintenance, disposal10.1 CleaningDo not use aggressive cleaning agents (solvents or similar agents), but a cloth dampened with mild soap suds or cleaning agent. Ensure that no liquid penetrates into thedevice and wipe the device with a dry soft cloth.Loose impurities can be removed carefully by using a brush or hand vacuum cleaner.Do not tilt or turn the scale to carry out its cleaning because this may result in thescale damage.Remove any impurities immediately.10.2 Service, maintenanceThe device may only be operated and maintained by trained service technicians whoare authorised by KERN.10.3 DisposalDisposal of packaging and device must be carried out by an operator according tovalid national or regional law of the location where the device is used.MBE-BA-e-0911 11

/ 12

Related manuals for KERN MBE 20K10