The chair scales may not be used for the transport of people!As long as the patient is remaining on the chair scales, thewheel brakes must be locked without fail. Do not step onto the foot rests when stepping or leaving thechair scales!3.3 Improper UseDo not use these scales for dynamic weighing processes.Do not leave continuous loads on the seating surface or weighing plate. This maydamage the measuring system.Impacts and overloading exceeding the stated maximum load (max) of the seatingsurface or the weighing plate, minus a possibly existing tare load, must be strictlyavoided. This could cause damage to the balance.Never operate balance in explosive environment. The serial version is not explosionprotected. It should be noted that a flammable mixture of anaesthetics and oxygen orlaughing gas may occur.Do not modify the construction of the scales. This may lead to incorrect weighingresults, safety-related faults and destruction of the balances.The balances may only be used according to the described conditions. Other areasof use must be released by KERN in writing.3.4 WarrantyWarranty claims shall be voided in case Our conditions in the operation manual are ignored The appliance is used outside the described uses Modification or opening of appliances mechanical damage and damage caused by media, liquids, Natural wear and tear The appliance is improperly set up or incorrectly electrically connected The measuring system is overloaded Dropping of scales8 MCB_MPT-BA-e-1217