KERN MFB series Operating Manual

Also see for MFB 150K100: Operating manual Operating manual

Contents

KERN MFB series Operating Manual Manual pdf 8 page image

MFB-BA-e-172087 Unpacking, Setup and Commissioning7.1 Installation Site, Location of UseThe balances are designed in a way that reliable weighing results are achieved incommon conditions of use.You will work accurately and fast, if you select the right location for your balance.Therefore, observe the following for the installation site:- Place the balance on a firm, level surface;- Avoid extreme heat as well as temperature fluctuation caused by installingnext to a radiator or in the direct sunlight;- Protect the balance against direct draughts due to open windows and doors;- Avoid jarring during weighing;- Protect the balance against high humidity, vapours and dust;- Do not expose the device to extreme dampness for longer periods of time.Non-permitted condensation (condensation of air humidity on the appliance)may occur if a cold appliance is taken to a considerably warmer environment.In this case, acclimatize the appliance for ca. 2 hours at room temperature.- Avoid static charge of the balance and of the person to be weighed.- Avoid contact with water.The occurrence of electric fields or electrostatic charge may result in major displaydeviations (incorrect weighing results). In that case, the location must be changed.7.2 UnpackingTake the whole balance out of their packaging and place them at the intendedposition. In addition to the scales, delivery also includes operating instructions.7.3 Battery operationThe message “LO“ on the display indicates a low battery. Replace batteries asquickly as possible with a new set.Insert batteries as shown in the illustration:If the balance is not used for a longer time, take out the batteries and store themseparately. Leaking battery liquid could damage the balance.