KERN OEX 6K-3HM Operating Manual

Contents

CAUTION!• To prevent electrostatic charge, connect the balance to earth.• The contact slots for the wires are marked with the icon „ “.• Prior to transport, prepare a PE conductor for electrostatic connection to earth ofthe display unit.• The PE conductor should end in a loop that is screwed to the display unit with thehelp of nuts (M4).• To ensure that the loop is fixed permanently and in contact with the display unit,use a lock washer.• The PE conductor should be of yellow and green colour and provide a sectionalsurface of 4mm².The diagram below shows the balance’s connection to earth:Place the platform balance and the display unit on the intended installation site in theex-area and connect it to earth.Transport SecuringWeighing panSafe areaEx-protected area10 Doc.No.OEX-BA-e-1411