7.2.2 Scope of deliverySerial accessories:• Balance• Weighing plate• Power cable• Protective cover• Battery• Operating Manual7.3 Mains connectionPower supply is carried out by means of the supplied power cable (220 V, 50-60 Hz).7.4 Battery power supplyThe battery is charged via the internal power supply.Before the first use, the battery should be charged by connecting it to the mainspower supply for at least 15 hours. The operating time of the battery is about. 70h.Charging time until complete recharging ca. 12h.Selectable AUTO-OFF function after 1, 5, or 10 min (see chapt. 10) to protect thebattery.If an arrow shows in the weight display [T] above the battery symbol or “bat lo”the capacity of the battery will soon be exhausted. The balance will be ready to oper-ate for about another 10 min., then it will switch off automatically. Connect the poweradaptor as soon as possible to change the battery.The LED display below the parts counting window informs you about the chargestatus of the battery.red: Battery is almost dischargedgreen: Battery is completely dischargedyellow: Battery should be charged over a longer period (over night)7.5 Initial CommissioningA warming up time of 5 minutes after switching on stabilizes the measuring values.The accuracy of the balance depends on the local acceleration of gravity.Strictly observe hints in chapter Adjustment.RPB-N-BA-e-091416