KERN RXB Operating Instruction

KERN RXB Operating Instruction Manual pdf 12 page image

RXB-BA-e-1012124 Basic Information (General)4.1 Proper useThe balance you purchased is intended to determine the weighing value of materialto be weighed. It is intended to be used as a “non-automatic“ balance, i.e. the mate-rial to be weighed is manually and carefully placed in the centre of the weighing plate.As soon as a stable weighing value is reached the weighing value can be read.4.2 Improper UseDo not use balance for dynamic weighings. In the event that small quantities are re-moved or added to the material to be weighed, incorrect weighing results can be dis-played due to the “stability compensation“ in the balance. (Example: Slowly drainingfluids from a container on the balance.)Do not leave permanent load on the weighing plate. This may damage the measuringsystem.Impacts and overloading exceeding the stated maximum load (max) of the balance,minus a possibly existing tare load, must be strictly avoided. Balance may be dam-age by this.Never operate balance in explosive environment. The serial version is not explosionprotected.The structure of the balance may not be modified. This may lead to incorrect weigh-ing results, safety-related faults and destruction of the balance.The balance may only be used according to the described conditions. Other areas ofuse must be released by KERN in writing.4.3 WarrantyWarranty claims shall be voided in case• Our conditions in the operation manual are ignored• The appliance is used outside the described uses• The appliance is modified or opened• Mechanical damage or damage by media, liquids, natural wear and tear• The appliance is improperly set up or incorrectly electrically connected• The measuring system is overloaded