KERN SFB 10K1HIP Operating Instructions Manual

Also see for SFB 100K10HIP: Operating instructions

KERN SFB 10K1HIP Operating Instructions Manual Manual pdf 40 page image

SFB-BA-e-101340Service, mai nce,ning• Before cleaning, disconne e ap• Cleaning is p e by wa jet a• Do not apply aggressive det9.2 Service, maintenanceThe appliance may only be openby KERN.Before opening, disconnect from power supply..3 Disposalisposal of packaging and appliance must be carried out by operator according tovalid national or regional law of the location where the appliance is used.9.4 Error messages9 ntena disposal9.1 Cleact th pliance from the operating voltage.ossibl ter nd short-time immersion.ergents (solvents etc.).ed by trained service technicians who are authorized9DError message Description Possible causes- - - - - Maximum load exceeded • Remove load from scaleor reduce preload.Zeroing range exceededdue to switching-on balanceor pressing (normally4% max)• Object on the weighingplate• Overload when zeroing• Improper adjustment• Damaged weighing cell• Damaged electronicsValue outside the A/Dchanger range• Weighing plate notinstalled• Damaged weighing cell• Damaged electronicsShould other error messages occur, switch balance off and then on again. If the errormessage remains inform manufacturer.

/ 43

Related manuals for KERN SFB 100K10HIP