KERN VHM_M Operating Instructions Manual

Contents

KERN VHM_M Operating Instructions Manual Manual pdf 23 page image

Activate / save tare weight:¾ Press for three seconds.The indicator W next to „NET“ will be displayed.If the system is unloaded, the entered tare value is shown negative.If the system is loaded, the net value of the weighed weight will appear on thedisplay.The entered value remains active until a new tare weight is entered or a new loadis tared, (see chapter 10.4.1) or a reset to zero is carried out.Return to weighing mode:¾ If the system is loaded, press for 2 seconds. The tare value will be resetto zero and the system reverts to standard weighing mode.or¾ If the system is unloaded, press the button. A reset to zero is carried outand the system reverts to standard weighing mode.10.4 Addition of individual weighingsThe display unit offers an option that allows the addition of weighing values and thedisplay of the total weight. When the tare weight is active, the net weight isautomatically added up.Add up:¾ Loading the system with the load to be added¾ Wait for the stability display, then press , the weight value will be added intothe summation memory.In the display alternately appear consecutive numbers (number of weighings) andthe total weight (summation memory).After a few seconds the system automatically reverts to standard weighing mode.¾ Add more weighed goods as described before. Please note that the system mustbe unloaded between the individual weighing procedures.Display the saved weighing data:¾ Press the button for three seconds. The total weight (summation memory) andthe number of weighings will de displayed alternately.After a few seconds the system automatically reverts to standard weighing mode.VHM_M-BA-e-1012 23

/ 25

Related manuals for KERN VHM_M