KERN YKD Series Operating Instructions Manual

Contents

KERN YKD Series Operating Instructions Manual Manual pdf 4 page image

1 Technical dataSecond LCD with a numeral height of 25 mmVoltage supply is provided by the supplied plug-in power unit 9V 300 mAor by a 9V block battery.3 x RS232 interface:1 input port for link-up to balance2 output ports for connection of printers, PC, label printers etc.2 Basic Information (General)2.1 Proper useThe second display unit acquired by you serves as an additional display unit awayfrom the balance and is used for the display of the weighing value for material to beweighed. It is possible to connect a further 2 devices with serial RS232 interfaces.2.2 Improper UseNever operate second display unit in explosive environment. The serial version is notexplosion protected.The structure of the second display may not be modified. This may result in incorrectdisplay results, safety-related defects as well as destruction.The second display may only be used according to the described conditions. Otherareas of use must be released by KERN in writing.2.3 WarrantyWarranty claims shall be voided in case• Our conditions in the operation manual are ignored• The appliance is used outside the described uses• The appliance is modified or opened• mechanical damage and damage caused by media, liquidsnatural wear and tear• The appliance is improperly set up or incorrectly electrically connectedYKD-BA-e-0710 5