KIDDY FIX Manual
                                                                     |
7The final installation step is to adjust the support base (G).To achieve this, activate (1) the yellow support base handle (I) and pull thesupport base (G) out until it stands firmly on the floor of the vehicle and bothsupport foot displays indicate red (Fig. 8).Lift the platform slightly up if necessary.Check that the mechanical parts latch in correctly by trying to retract the sup-port base (G) without activating the support base handle (I). If the supportbase (G) is not moving, it is properly latched.Your kiddyfix must always be used with folded out and correctly adju-sted support base (G)!Now you can install your kiddy child safety car seat according to itsinstruction manual on the kiddyfix (A).Prior to every trip, check whether all systems are correctly latched, oradjusted.5. DismantlingFirst remove the kiddy child safety car seat from the kiddyfix platform (A) asexplained in its instruction manual.Now you can start with dismantling the platform (A).Keep both ISOFIX unlatch buttons (E) pressed in and simultaneously pull theplatform (A) from the brackets downwards to the front (Fig. 9).The support base (G) can now be retracted and the support leg (F) folded inunder the platform (A). When the support base (G) is pulled out now(Fig. 10), it remains anchored under the platform (A).ENG |
manualsdatabase
Your AI-powered manual search engine