KIDDY GUARDIAN PRO 2 Instruction Manual

Also see for GUARDIAN PRO 2: Manual Manual Directions for use Brochure Manual

Contents

KIDDY GUARDIAN PRO 2 Instruction Manual Manual pdf 34 page image

8.3 Removing the seat coverThe leg extension cover is fastened with a rubber band. You can carefullypull the cover off in an upward motion.Then open the press studs or Velcro® fasteners underneath the legextension and at the bottom of the seat.Remove the strap from the backrest (C) and pull the cover off in an upwardmotion.8.4 Impact shield coverThe impact shield cover may not be removed or washed.Please consult your dealer or manufacturer if the impact shield or its cover isdamaged.8.5 Replacing the coverTo replace the cover, follow the steps for removing the cover in reverse order(see Sections 8.1 – 8.3).9. Instructions for care9.1 Cleaning the coverThe covers are an essential component of the safety concept. Therefore, youshould use only original covers from the manufacturer. If you requirereplacement covers, you can order them from the manufacturer.The cover and removable retainer strap for the toy figuresare machine washable at 30ºC in the delicates cycle. Donot spin or put into the dryer.13ENG