KIDDY Guardian Pro 2 Directions For Use Manual

Also see for GUARDIAN PRO 2: Manual Manual Directions for use Brochure Manual

Contents

KIDDY Guardian Pro 2 Directions For Use Manual Manual pdf 29 page image

9Do not attempt to adjust the reclined position during travel. Alwaysbring your vehicle to a complete stop to do this. Unfasten the vehiclerestraint, change the position of the sleeping clamp (E) and thebackrest (C), and then secure your child (the child restraint system)again.To secure your child in the reclined position, proceed as described in Section6.6. In-vehicle installation for Age Group I (9-18kg)Position your kiddy on the vehicle seat as described in Section 4.Check to see whether your kiddy is adjusted to the size or body weight ofyour child (Section 5).The kiddy guardian pro 2 is secured with the three-point vehicle restraintusing the belt guide on the impact shield (N) (Fig. 14).Your kiddy guardian pro 2 may only be used for Age Group I with theimpact shield (M) and seat cushion (K) belonging to it.Place your child in the seat and ensure that the child’s buttocks press againstthe backrest (C).Push the impact shield (N) into the guide slots on the seat section (Fig. 15).Slide the impact shield back so that it rests right on your child's tummy.Then pull your vehicle’s three-point restraint out far enough so that it goesaround your kiddy and can be directly fastened in your vehicle's ownseatbelt lock (Fig. 16).Make sure that the seatbelt tongue locks securely in place with a noticeable“click.”ENGAll manuals and user guides at all-guides.com