KING K series Installation, Operation & Maintenance Instructions Manual

Also see for CB series: Installation guide Installation, operation & maintenance instructions

Contents

KING K series Installation, Operation & Maintenance Instructions Manual Manual pdf 1 page image

GENERALThis heater is designed to provide years of efficient, trouble free operation as a primary or supplementary heat source for com-fort heating in residential and commercial applications. Baseboard heaters must be thermostatically controlled for efficient, safeoperation. A thermostat is not provided with this heater. However, a single or double pole thermostat accessory is available forinstallation into this heater at your place of purchase, or the heater may be connected to any suitable wall mounted thermostatthat will meet the electrical load requirements. Installation or use of this product in any manner not described herein will voidthe warranty and could result in injury, damage to property, or permanent damage to heater.IMPORTANT INSTRUCTIONSInstallation, Operation & Maintenance Instructionselectrical mfg companyRead all instructions before installing or using the heat-er.A heater has hot and arcing or sparking parts inside, Donot use in areas where gasoline or flammable liquids areused or stored.This heater is hot when in use. To avoid burns, do notlet bare skin touch hot surfaces. Keep combustiblematerials, such as furniture, pillows, bedding, papers,clothes, and curtains away from heater.1)2)3)To prevent a possible fire, do not block air intakes or ex-haust in any manner.Do not insert or allow foreign objects to enter any ven-tilation or exhaust opening as this may cause an electricshock or fire, or damage the heater.Serious injury or death could result from electric shock.Make sure electrical power supply circuit coming to heat-er is disconnected at main disconnect or service panelbefore installing or servicing this heater.4)5)6)WARNINGTable 1Total Amps Minimum AWG.Wire Size(Copper)Circuit Breaker orFuse Size0 thru 12 #14 15 amp12.1 thru 16 #12 20 amp16.1 thru 24 #10 30 ampTable 2: Net Volumes of Wiring CompartmentDescription Cubic Inches Cubic CMHeater Only(Each Wiring Compartment) 49.69 8.14Heater with SP Thermostat 44.24 7.25Heater with DP Thermostat 44.24 7.25NAMEPLATEFigure 1: Nameplate LocationSAVE THESE INSTRUCTIONSWHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE,ELECTRIC SHOCK, AND INJURY TO PERSONS, INCLUDING THE FOLLOWING:

/ 4

Related manuals for KING CB series