Kadeka KA45WR Instruction Manual
Also see for KA45WR: Instruction manual
       | |
5 How to remove the ShelvesType AFirstly remove both of the plastic posts with the Phillips screwdriver, then pull on onward directionto remove the shelf.Type BMove the shelf towards the gap on the both sides and alignment with shelf support A. Then,upwards the shelf and pull out it from the cabinet once the shelf support disengaged from the gap.NOTE:If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting theunit. If you attempt to restart before this time delay, the Wine Cooler will not start.When you use the Wine Cooler for the first time or restart the Wine Cooler after having been shut offfor a long time, there could be a few degrees variance between the temperature you select and theone indicated on the LED readout. This is normal and it is due to the length of the activation time.Once the Wine Cooler is running for a few hours everything will be back to normal.CARE AND MAINTENANCE Cleaning Your Wine ChillerTurn off the power, unplug the appliance, and remove all items including shelves and rack.Wash the inside surfaces with a warm water and baking soda solution. The solution should beabout 2 tablespoons of baking soda to a quart of water.Wash the shelves with a mild detergent solution.Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electricalparts.Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe drywith a clean soft cloth. Power FailureMost power failures are corrected within a few hours and should not affect the temperature of your |
Related manuals for Kadeka KA45WR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine