27© 2017 Infinite Electronics, Inc., All Rights Reserved.equal to or outside the Limits set. When testing against limits please ensure your sweep is configured appropriately.1.18.2 Minimum Limit1.18.2.1 Minimum Limit StartThis is the starting point that spec level is applied over in this case 2000MHz.1.18.2.2 Minimum Limit StopThis is the end point that spec level is applied over in this case 2090MHz.1.18.2.3 Minimum Limit Level1.18.2.4 Limit label, type and resultThe limit label shows the label you created in the limits menu, the down arrow shows this is a Minimum spec limit. There isa result shown here also, between the start and stop points the trace has a Minima of -1.33Figure 18 Minimum Spec Limit1.18.2.1 1.18.2.21.18.2.41.18.2.3