K&F SCENA 12 User Manual
                               | |
Contents
| 
User's Manual K&F SCENA 12KLING & FREITAG GMBH © 2018 Version 1.2 Page 16 of 317. Setups and Connection DiagramsThe K&F SCENA 12 offers much flexibility in terms of cabling and operation.You can connect a maximum of six speakers to a 4-wire NL4 cable fed by two amp channels.For example, the first line could run from the amp to a main-terminal port. Further speakerscan be connected to either a main port or one of the lateral aux ports. The K&F SCENA 12supports all reasonable connection types.If you use a four-wire cable fed from two amp channels, you can select the output channelindividually on each K&F SCENA 12 speaker. You can connect up to three speakers perchannel.If you don’t need to select a specific channel, you can also use a 2-wire NL4 cable.In that case, be sure to set the channel selector to channel 1. Otherwise, you won’t hearanything.Connect the desired number of speakers (up to three channels per speaker, i.e. six in total)and use the channel selector for setting the actual output channel.ab• a: Playback of channel 1• b: Playback of channel 2 |
Related manuals for K&F SCENA 12
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine