Karcher Shark XPERT-HD 2.3/23 P LEGACY Operator's Manual
                  | |
8.780-013.0 • Xpert-HD/DD • Rev. 10/099PRESSURE WASHER OPERATOR’S MANUALSTEP 1: Check engine oil level. Oil level should be level with the bottomof the oil filler neck. Be sure the machine is level when checking the oillevel. (Refer to the engine's operating manual included with machine.)We recommend that the oil be changed after the first 5 hours of use, thenonce every 50 hours. Note: Improper oil levels will cause low oil sensorto shut off engine. IMPORTANT! Do not run engine with high or lowoil levels as this will cause engine damage.STEP 2: Remove shipping capand install oil dipstick. Checkpump oil level by using dipstick orobserve oil level in oil window (ifequipped). Use 40 wt. non deter-gent oil. The Legacy Axial Pumpdoes not require maintenance. At-temping to check oil on this pumpmay damage it and will void yourpump warranty.STEP 4: Connect garden hoseto the cold water source and turnwater on completely. Never usehot water.STEP 6: Rotate the fuel shut-off valve to the "On"position. Slide the fuel valve lever to the "ON" position.When the engine is not in use, leave the fuel valve inthe "OFF" position.STEP 5: Trigger the spray gun toeliminate trapped air then wait fora steady flow of water to emergefrom the spray nozzle.OPERATING INSTRUCTIONSSTEP 3: Fill gas tank with unleadedgasoline. Do not use leaded gaso-line.STEP 7: Move the choke lever to the "Choke" posi-tion (on a warm engine, leave the choke lever in therun position). Move the choke lever to the "Closed"position. To restart a warm engine, leave the chokelever in the "Open" position.Oil DipstickDipstickOil WindowGasTankColdWaterSourceGardenHoseChokeLeverfuelvalveChokefuelvalve |
Related manuals for Karcher Shark DD-232336
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine