Karda KD4000-2S Series User Manual
                                    | |
Contents
| 
Chapter 3 Operation Panel11II. Digital Keypad Parts and FunctionsKEY FunctionsFor normal operating or programming mode (the key isalways valid). Must select programming mode to modify parametersIf the drive is shut down due to a fault occurs, aftertroubleshooting, press this button will clear the errormessage.This is data setting key. In normal operating mode, pressthis button to display the drive status information, such asfrequency command, output frequency and input current;in programming mode, press this key to display theparameter content. Then Press this button again will savethe changed parameters to the internal memorySelect forward or reverse operation. Press this button , themotor will decelerate to 0HZ and change direction, butmotor will not restart automatically after the shutdown. Anexternal terminal can control motor forwarding orreversing, when modify Pr.001 to "d0001" or "d0002"Press this button ,the motor will run at jog frequency as setby the parameter specified under Pr.23start running key (if set to an external terminal control,press this key is invalid)Stop key.Press the “Up” and “Down” button to select or modifyparameters ..Note: Pressing the “Up” or “Down” button momentarilychanges the parameter settings in increments. Press andhold these keys to rapidly run through the possiblesettings. |
Related manuals for Karda KD4000 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine