Kasco 3400JF Owner's Manual

Also see for 3400HJF: Operation & maintenance manual Owner's manual Operation & maintenance manual Operation & maintenance manual

Contents

Kasco 3400JF Owner's Manual Manual pdf 10 page image

10Willow Display:The Willow nozzle (marked W on the inside of thecone) uses the 3/8” x 4” bolt.Model Height Width3400JF/HJF 4.5’ 15’4400JF/HJF 6’ 23’Juniper Display:The Juniper nozzle (marked with J on in inside of thenozzle cone) uses the 3/8” x 4” bolt.Model Height Width3400JF/HJF 3’ 20’4400JF/HJF 4’ 27’Sequoia Display:The Sequoia nozzle is not marked and uses the shorter3/8” x 2.25”Model Height Width3400JF/HJF 7’ 4’4400JF/HJF 9.5’ 6’Nozzle OptionsNOTE: Pattern sizes listed are approximate. Varia-tions in voltage caused by regional electrical differenc-es or voltage drop due to long power cords may resultin reduced pattern sizes.• The Cypress is the only nozzle that uses the sepa-rate collar labeled C2.• The Cypress, Linden, Willow, and Juniper nozzlesuse the 3/8” x 4” bolt.• The Sequoia nozzle uses the shorter 3/8” x 2.25”bolt.To install, simply drop the bolt through the nozzle andthread into the top of the cone on the fountain.Cypress Display:The Cypress nozzle (marked C1 on fin) makes use ofthe collar (marked C2 on the top rim) and the 3/8” x4” bolt.Model Height Width3400JF/HJF 6’ 16’4400JF/HJF 7.5’ 25’Linden Display:The Linden nozzle (marked L inside one of the fins)uses the 3/8” x 4” bolt.Model Height Width3400JF/HJF 6’ 18’4400JF/HJF 8’ 25’