37COMMAND OVERVIEW FOR TV FREQUENCY ENTRYSwitch to desired TV receptionChannel/frequency switch... Enter frequencyConfirm entryand Change frequency in intervalsorExampleTo enter the frequency 175.25 MHz:Press (calling up the frequency menu)Then(frequency entry)LC display:• Frequency: 175.25 MHz• Level: 65.0 dBμV• Operating mode: Analogue cable TVTV MEASUREMENTAfter calling up the frequency menu for the first time you have toenter the digit order for another frequency entry.The most recent frequency setting remains even after you switchthe MSK 125 off if it has been entered with digits and confirmed bypressing .Note“CABLE ANALOGUE” LEVEL MEASUREMENTAfter you have set a channel or frequency the level is measuredautomatically and indicated on the LC display in dBμV or dBmV(depending on the device configuration). The input level can bemeasured in the range of 30 dBμV to 120 dBμV (-30 dBmV to60 dBmV).LC display:• Channel: CH 05• Operating mode: Analogue cable TV• Measured level: 86.5 dBμVPlease note that the points before and after the channel numberrefer to the precisely set channel:CH: .10. or CH: S.04.If you enter the frequency outside the valid channel raster, thechannel is displayed without points:CH: 10 or CH: S 04
