Kathrein MSK 25 Instruction Manual

Also see for MSK 25: Manuel d'utilisation

Contents

Kathrein MSK 25 Instruction Manual Manual pdf 20 page image

SAT measurement20Locating SatellitesWith the SCAN function, satellites, the exact transponder frequencies ofwhich are unknown, can be located. In doing so, the frequency rangefrom 1000 MHz to 2100 MHz is continuously scanned for receivedsignals. If signals are received, the reception level is displayed as a bargraph. The measurement range may be adjusted to three differentsensitivity levels.The level can be monitored with an acoustic signal, the pitch of which isproportional to the received-signal level. The volume of the acousticsignal can be adjusted with the volume regulator.SCAN Menu[2ndF] [SCAN] Changing over to SCAN mode[-] [+] Change-over of the bar graph measurement range.Level range 1: high input levelsLevelrange 2: medium input levelsLevel range 3: low input levels[2ndF] [2ndF] ExitLC display:• Level range 2: medium input level• SAT mode• Bargraph displayExampleCalling up SCAN mode:• Press [2ndF] [SCAN].• Move the antenna until there is a level tendency visible on the bargraphdisplay.• Move the antenna until the maximum amplitude on the bargraph displayis reached.• If necessary, diminish or elevate the sensitivity by pressing either [-] or[+].Exit:• Press [2ndF] twice.✐LEV-Range:2 SAT> ■■■■À