Kathrein MobiSet 2 digital CAP 600 Installation And Operating Manual

Also see for MobiSet 2 Digital CAP 600: Important information Installation and operating manual

Contents

Kathrein MobiSet 2 digital CAP 600 Installation And Operating Manual Manual pdf 22 page image

22INSTALLATION AND CONNECTIONUnder certain circumstances, problems can arise when the units are connected to different connectingsockets or circuits/earth potentials. If none are available, it is recommended that you connect the connectingsockets for receiver and TV set to the same cable, as depicted in Figure “G”. The current rating of the circuitused must be checked with respect to the intended application.Further information on operating the UFS 740sw receiver can be found in the operating manual suppliedwith the unit.Only for connection in a motor home, not in a caravan!• The third, green connecting cable, marked “IGNITION” allows you the option of connection to a circuit inthe vehicle that is activated when the ignition key is turned and then carries a continuous 12 V supply.This type of connection ensures that when the engine is started the antenna is automatically loweredinto the park position (the receiver does not need to be turned on).• Check the connections before you re-connect the on-board network.• For commissioning and more detailed information on additional operator functions, we refer you to theseparate operating manual enclosed.FUNCTIONAL INSTRUCTIONS FOR CONNECTION TO THE ON-BOARD POWER SUPPLY