Kawai CA840 Owner's Manual

Also see for Digital Piano CA440: Owner's manual

Hold down the SPLIT button and press a TONE SELECTOR to change the LOWERtimbre. The selected timbre becomes the LOWER tone.The LED for the UPPER keyboard timbre glows continuously; the one for theLOWERkeyboard flashes.For the bass sounds, one of the three buttons on the right end of the TONESELECTOR will select the preset bass sounds, WOOD BASS, ELECTRIC BASS,and SLAP BASS. Pushing one of these three buttons once again while holdingdown the SPLIT button will select the preset sounds whose names are written belowthe button - HARPSICHORD, VIBRAPHONE, and STRINGS.weeAdjust the relative loudness of the two tone colors with the DUAL/SPLIT BALANCEcontrol.aT) aaTo cancel SPLIT MODE....Push the SPLIT button again. The LED above it will turn off and the keyboard willreturn to normal play mode.* When the function is first activated, the keyboard is split at the pointmarked with a triangle on the front panel, and LOWER keyboardassumes the WOOD BASS tone.* The LOWER tone specification remains in effect until the power isremoved or the tone is changed.% Switching from DUAL operation to SPLIT operation makes the UPPERkeyboard assume the right tone and the LOWER assume the WOODBASS or the tone you chose for the LOWER tone.%* You must turn the SPLIT operation off before you can return to DUALoperation.% To change the SPLIT point, see p. 23 "Changing the SPLIT POINT".