Page7Notes on RepairShould an abnormality occur in the product, immediately turn the power OFF, disconnect thepower cord plug, and then contact the shop from which the product was purchased.CAUTION:To prevent electric shock, match wide blade of plug to wide slot, fully insert.ATTENTION:Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la bornecorrespondante de la prise et pousser jusqu'au fond.Instruction for AC power cord (U.K.)Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.Canadian Radio Interference RegulationsThis instrument complies with the limits for a class B digital apparatus, pursuant to the RadioInterference Regulations, C.R.C., c. 1374.An information on Disposal for usersIf your product is marked with this recycling symbol it means that, at the end of itslife, you must dispose of it separately by taking it to an appropriate collection point.You should not mix it with general household waste. Disposing of this product correctlywill prevent potential negative effects on the environment and human health whichcould otherwise arise due to inappropriate waste handling.For further details, please contact your local authority.(European Union only)The product should be serviced by qualified service personnel when:● The power supply cord or the plug has been damaged.● Objects have fallen, or liquid has been spilled into the product.● The product has been exposed to rain.● The product does not appear to operate normally or exhibits a marked change inperformance.● The product has been dropped, or the enclosure damaged.The product should be located so that its location or position does not interfere with its properventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.Failure to do so may over-heat the product,resulting in fire.Ensure that the ventilation is notimpeded by covering the ventilationopenings with items, such as newspaper,table-cloths, curtains, etc.