45Appendix3. Mounting the main body aSecure the main body to the stand from below, using the fourscrews (with the flat washer and spring washer) g.Tighten all screws securely to ensure that themain body is firmly attached to the stand.Failing to do so may result in serious injury.Front viewa abbaabbdabggEnsure that two or more people undertake thefollowing step of the assembly process.Lift the main body a and carefully place it onto the stand.Position the main body towards the front of the stand, so thatthe metal fitting holes are visible when viewed from above.Gently slide the main body backwards until the base engageswith the fixings inside the side panels and locks into place.When lifting the main body onto the stand, becareful not to catch/trap hands and fingers.12ab cab