38EDIT MenuEDIT Menu parameters (PIANO, E.PIANO, SUB)3.2 Amp Simulator (E.PIANO)1. Amp TypeThis parameter selects the Amp type.* For more information about the Amp Simulator, please refer to page 23.2. DriveThis parameter adjusts the amount of overdrive produced bythe amplifier, and is also controlled by the E.PIANO section’sDRIVE knob.* For more information about the Amp Simulator, please refer to page 23.3. LevelThis parameter adjusts the volume of the amplifier.* For more information about the Amp Simulator, please refer to page 23.4. Amp EQThese parameter adjust the HI, MID, and LO frequencies of theamplifier.* These parameters function independently of the MP10’s main EQ controls.* For more information about the Amp Simulator, please refer to page 23.3.3 Layer Tone (SUB)1. SweepThis parameter adjusts the amount of Sweep pad sound that isadded to the selected SUB sound.2. BellThis parameter adjusts the amount of Bell pad sound that isadded to the selected SUB sound.4 Tuning1. Fine TuneThis parameter adjusts the tuning of the selected sound forvalues smaller than a semi-tone.2. Stretch TuningThis parameter selects the level of stretch tuning.The human ear typically detects high and low frequencies less accuratelythan those frequencies within the middle range. The tuning of an acousticpiano is therefore ‘stretched’ to compensate, ensuring that the sound willbe heard more naturally to the ears.3. TemperamentThis parameter selects the tuning system of the selected sound.* For more information about Temperaments, please refer to page 39.* Custom USER temperaments can be created in the User Edit page of theSYSTEM menu (page 75).4. Key of TemperamentThis parameter selects the key of the selected temperament.When using a temperament other than Equal Temperament,use this setting to specify the key signature of the piece.* This parameter will only affect the ‘balance’ of the tuning system, thepitch of the keyboard will remain unchanged.VALUE : 0 - 127VALUE : 0 - 127VALUE : 0 - 127VALUE : 0 - 127VALUE : 0 - 1276 TYPES9 TYPESVALUE : –64 - +637 TYPES + 2 USER RANGE : C - B