Kawai MP11 Owner's Manual

Also see for MP11: Owner's manual

Contents

Kawai MP11 Owner's Manual Manual pdf 57 page image

EDIT Menu Controllers1. Right PedalThis parameter determines whether or not the right pedal ofthe F-30 pedal unit is active for the selected zone.2. Right Pedal AssignThis parameter selects the function assigned to the right pedalof the F-30 pedal unit.* This parameter is common for all four MIDI zones.3. Half Pedal ValuesThis parameter changes the half pedal ranges sent by the right pedal of the F-30 pedal unit for the selected zone.This parameter is useful when using the MP11 to control external tone generators (e.g. software pianos) that respond to damper pedal behaviour differently.Half Pedal Value Value Range DescriptionNormal (default) 0 ~ 127 The damper pedal sends a full range of evenly distributed values.High 0, 64 ~ 127 The damper pedal sends a full range of evenly distributed values after the half-pedal point is reached.Low 0 ~ 63, 127 The damper pedal sends a full range of evenly distributed values before the half-pedal point is reached.4. Center PedalThis parameter determines whether or not the centre pedal ofthe F-30 pedal unit is active for the selected zone.5. Center Pedal AssignThis parameter selects the function assigned to the centrepedal of the F-30 pedal unit.* This parameter is common for all four MIDI zones.6. Left PedalThis parameter determines whether or not the left pedal of theF-30 pedal unit is active for the selected zone.7. Left Pedal AssignThis parameter selects the function assigned to the left pedalof the F-30 pedal unit.* This parameter is common for all four MIDI zones.8. Pitch BendThis parameter determines whether or not the pitch bendwheel is active for the selected zone.9. Pitch Bend RangeThis parameter sets the range of the pitch bend wheel in semi-tone steps.* The range differs for the internal sound (0 ~7) and MIDI (0~12) sections.10. Modulation WheelThis parameter determines whether or not the modulationwheel is active for the selected zone.11. Modulation Wheel AssignThis parameter selects the function assigned to the MP11’smodulation wheel.12. Expression PedalThis parameter determines whether or not the expressionpedal (if connected) is active for the selected zone.* For more information about connecting pedals, please refer to page 18.13. Expression Pedal AssignThis parameter selects the function assigned to the expressionpedal (if connected).* This parameter is common for all four MIDI zones.* For more information about connecting pedals, please refer to page 18.on , offon , off cc#0 ~ cc#119, aftertoucHon , off cc#0 ~ cc#119, aftertoucHon , off cc#0 ~ cc#119, aftertoucHon , offcc#0 ~ cc#119,aftertoucHnormal , H igH, lowon , off value : 0 ~ 12cc#0 ~ cc#119,aftertoucH