(3) Press the PIANO1 switch to enter the CHANNEL SELECT mode,and select MIDI Channel one from 12 through 16 (see p. 13).(4) Press the CHORUS switch to leave the programming mode.(5) Connect a MIDI cable to both the MIDI IN and MIDI OUT jacks atthe rear of the piano.This procedure lets you play in the PIPE ORGAN and BELL timbresallotted to Channels 12 through 16 with the piano's own keyboard.Moreover, turning on LOCAL CONTROL as described in step (2) letsyou play with the timbres of the TONE SELECTORS on the panellayered over.19