1. When setting camera parameters, please put camera in Setup mode.2. Do not set the camera directly from ON to Setup.3. To replace the battery, SD card,firstly turn camera to OFF model.4. Color of Indicator1) When camera is updating, indicator light flashes green.2) The indicator light flashes red when it is turned on or ready for operation.3) low battery, the indicator light blue.4) long standby time, the indicator flashes purple.5. Batteries need to use dry batteries, can not use rechargeable batteries.6. When the SD card is inserted into camera, make sure that the SD card is not in the unprotected state.7. When using an external power supply, make sure that voltage is correct.8. Please take out the battery for long time unused, so as to avoid leakage of the battery time is too long.9. Camera can not be directly immersed in water, can not be placed in the environment of strong acid and alkali.10. Finger can not press the Fresnel lens.11. Keep the lens and battery compartment clean.12. Do not use sharp hard objects to attack the screen and so on.3KEEPTIMENotes Before Use