Kegel8 V For Men User Manual
                                                                    | |
Contents
| 
44Creating a Custom ProgrammeKegel8 V for Men has a custom programme feature that allowsdoctor or clinician to create up to 3 programmes designedspecifically for you.To create a custom programme:1. Press the ON button to power up your Kegel8 control unit.2. Press the PRG button on the front repeatedly until the LCDshows PC 1, PC 2, or PC 3. These are your 3 customprogramme memory slots.3. Press and hold the SET button for 3 seconds. The Hz symbolshown on the LCD will flash to show that it is selected andready for a value to be entered.4. Use the Channel B + or - button to adjust the pulse rate(Hertz). It can be set to a value between 2 Hz and 100 Hz forPC1 , PC2 and between 2 Hz and 60 Hz for PC3.NOTE: Hz, μS, WRK, RST, RMP, ALT, and SYN areexplained at the end of this section.5. Press the + button for Channel A. The μS symbol flashes. Usethe Channel B + and – button to adjust the pulseduration. It can be set to a value between 50 μS and 330 μS forPC1 , PC2 and between 50 μS and 450 μS for PC3.6. Press the + button for Channel A. The MIN symbol flashes.Use the Channel B + and - buttons to set the length of the firstphase time. You can use a value of 1 to 99 minutes.NOTE: If you want the programme to end on this phase, setthe MIN to 0. |
Related manuals for Kegel8 V For Men
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine