Kelon ND5-46 User Instruction
          | |
Contents | 
Wall-mounting1. Drill the required holes in the wall using the positioning screw holes.2. Attach the bracket to to the wall with the screws.3. Mount the heater to the bracket and engage the corresponding slots on therear of the heater.Removing the heater from the bracket1. Press and loosen all clips.2. Pull the heater to disengage the clips of the bracket.INSTALLATION INSTRUCTIONSTools required:1. Electric drill2. Cross-head screwdriver3. Tape measureDo not install the heater closer than 6in (152mm) to a vertical/horizontal surface.This minimum distance must be maintained.COUTION: High temperature, Keep Electrical Cords,Drapes, and otherfurnishings away from heater.1) Read all instructions before using this heater.2) Toreduce the risk of fire,do not store or use gasoline or other flammablevapors and liquids in the vicinity of the heater.3) Do not install the baseboard heater against combustible, low-density cellulosesurface.4) This heater is not intended for use below window or close to window or door.5) Do not insert or allow foreign objects to enteny ventilation or exhaust openingas this may cause an electirc shock or fire, or damage the heater.6) To prevent possible fire, do not block air intakes or exhaust in any manner, Donot use on soft surface,like a bed, where opening may become blocked.7) Keep furniture, drapes and carpets at least 3”(7.5mm) away from the front ofthe heater96in (15.2cm)6in (15.2cm)6in (15.2cm) 15.2cm12ab |
manualsdatabase
Your AI-powered manual search engine