Kelvinator KF820 User Manual

Contents

Kelvinator KF820 User Manual Manual pdf 14 page image

144. Select the temperatureTurn the dial to the required setting.5. Select the option push button/sand the spin speed.6. Select the programme and startthe machineTurn the programme selector dial clockwise to therequired programme.Before pulling the On/off programme selector check if:• The door is properly closed.• The appliance is plugged in.• The water supply tap is turned on.• The diaphragm lid is correctly screwed into place.• The drain hose is adequately positioned.Pull the program dial up to you till it clicks.The pilot light comes on and the program will begin.R0032S130°40°50°Operating sequenceBefore washing your first load of laundry, werecommend that you run a cotton cycle at 60°C, withthe machine empty, in order to remove anymanufacturing residue from the drum and tub.Pour half a measure of detergent into the main washcompartment and start up the machine.1. Place the laundry in the drumOpen the door.Place the laundry in the drum, one item at a time,shaking them out as much as possible.Close the door.2. Measure out the detergentPull out the dispenser drawer until it stops. Measureout the amount of detergent recommended by themanufacturer in a graduated cup and pour it into themain wash compartment .If you wish to carry out the prewash, pour detergentinto the appropriate compartment marked .3. Measure out the additivesIf required, pour fabric softener into the compartmentmarked , without exceeding the «MAX» mark.R0071R0070